Gateway for piéton
Allows the passage of two lanes (not checked)
Stop accidents on level crossings? Give your pedestrians this beautiful footbridge! This model is strongly inspired by the SNCF footbridges (or ex-SNCF companies) which allow pedestrians to cross the tracks without disrupting traffic.
The parts of this model are precision-cut from medium (for the pillars and arches), one millimetre thick birch plywood (for the steps) and cardboard (for the railings).
The parts of this model are precision-cut from medium (for the pillars and arches), one millimetre thick birch plywood (for the railings) and cardboard (for the railings).
The parts of this model are precision-cut from medium (for the pillars and arches), one millimetre thick birch plywood (for the railings) and cardboard (for the railings).
The parts of this model are precision-cut from medium (for the pillars and arches) and cardboard (for the railings).
This footbridge allows the passage of 2 non electrified lanes (without catenary). The photos show the situation with the rails raised (similar to a rail laid on a base plate). Assembly is easy. Paint and terra cotta will enhance this refined walkway.
Product features:
- &Product scale: 1 : 87ème (HO)
- Dimensions: length: 270 mm, height: 90 mm, width: 30 mm.
- Quantity of parts: 91.
- Materials: birch plywood 1 mm thick and MDF 3 mm thick, cardboard 0.8 mm thick.
- Materials: birch plywood 1 mm thick and MDF 3 mm thick, cardboard 0.8 mm thick.
- Materials: birch plywood 1 mm thick and MDF 3 mm thick, cardboard 0.8 mm thick.
- Materials: birch plywood 1 mm thick and MDF 3 mm thick, cardboard 0.8 mm thick.
- Materials: birch plywood 1 mm thick and MDF 3 mm thick, cardboard 0.8 mm thick.
- Assembly difficulty (1: easy; 5: difficult): 2/5 – requires small pliers to fit the steps and care to glue the railings.
- Model à assemble and à paint.
