Allows the passage of two lanes (not lectrified)
Model of a track footbridge with entry and exit parallel to the track. Two configurations of pillars are possible: symmetrical in relation to the track plane or asymmetrical.
The parts for this model are precision-cut from medium (for the pillars and arches), one millimetre thick birch plywood (for the steps) and cardboard (for the railings).
The parts for this model are precision-cut from medium (for the pillars and arches), one millimetre thick birch plywood (for the railings) and cardboard (for the railings).
The parts for this model are precision-cut from medium (for the pillars and arches), one millimetre thick birch plywood (for the railings) and cardboard (for the railings).
The parts for this model are precision-cut from medium (for the pillars and arches) and cardboard (for the railings).
This footbridge allows the passage of two non-electrified lanes (without catacombs). The photos show an example of the situation with the rails raised (similar to a rail laid on a base plate).
This footbridge allows the passage of two tracks that have not been checked.
Pillars that are symmetrical in relation to the track: pedestrians leave the footbridge in the opposite direction to the direction in which they entered. This configuration of the pillars can be seen in the photos.
The parts for this model are cut from three different materials: medium (MDF), birch plywood and woodboard. It is easy to assemble. Paint, earth à décor will easily enhance this refined gateway.
Product features:
- &Product scale: 1 : 87ème (HO)
- Dimensions: total length: 230 mm, total height: 90 mm, width: 60 mm.
- Quantity of parts: 93.
- Assembly difficulty (1: easy; 5: difficult): 3/5 - Requires meticulousness when gluing the rails and a small pair of pliers when gluing the steps.
- Product references: BM108003. (Previous reference : MFPasserelle002s).
