Under the reference ESU 59610, here is a V5 quadri-protocol DCC/MM/SX/M4 8-pin decoder for HO 1/87th and O 1/43rd scale locomotives.
RailComPlus technology: Automatic connection to a digital control unit.
Presentation of the ESU 59610 decoder,
Handles all DCC operating modes, as well as Motorola, selectrix and M4. can be controlled and programmed using compatible digital control units .
Thanks to RailCom, CV values on the main track can be read with suitable central units (CV 1 to 255). This decoder also benefits from 6 outputs with amplified functions that each hold a voltage of 180 mA. (the current of each output can be set separately).
Depending on the interface version, each LokPilot 5 decoder offers at least 10 amplified function outputs with an output current of 250 mA each. In versions with PluX22 or 21MTC interface, 4 outputs are added to control servos or logic level outputs. All the important lighting functions are available. The brightness of each output can be adjusted separately. The decoder controls automatic pressing and detaching on uncoupling
The decoder benefits from a language under DCC protocol, but can just as easily be registered under RailComPlus control centres.
The LokPilot V5 recognises Marklin braking sections as well as the Zimo HLU/ZACK and the Lenz ABC system. It is possible to use a DCC braking module or a direct voltage.
This LokPilot V5 decoder can be used on 2-rail (direct current) or 3-rail (alternating current) tracks. The decoder automatically switches between these two operating modes.
The outputs are protected against short circuits.
