Esu offers a LokPilot V5 Fx encoder for model trains à l39;échelle HO 1/87ème under référence 59212.
- This LokPilot V5 operating in DCC / MM / SX, is equipped with the latest RailComPlus technology, making it easy to connect to an appropriate digital control unit.
- It can be assigned to other LokPilot 5 ESU encoders to provide additional lighting effects.
- LokPilot V5 Fx encoder compatible with PluX22 interface and NEM 658 socket.
- The FX version is a déur without engine output, idéal for service vehicles (control car..).
- This digital module is available in 3 versions: the "classic" version with 8 pins and NEM 652 sockets, a variant for the 21MTC interface and 1 other for the PluX22 interface.
Features of the LokPilot V5 Fx encoder:
This digital device is a multi-protocol encoder, mastering the DCC, Motorola, Selectrix, and M4 data format. In DCC format, the encoder can vary its speed between 14 and 128 steps, offering up to 32 functions.
Thanks to RailComPlus technology, this encoder connects automatically to an appropriate digital control unit. It also masters all DCC programming modes, and the CV values on the main track can be read with appropriate control centres. Auxiliary registers are available for control centres that can only program CVs between 1 and 255.
.This module recognises Märklin brake sections and Zimo, HLU / Zack e Lenz ABC controls. You can also make DCC braking modules, stopping with a Selectrix brake diode.
This module recognises Märklin braking sections and Zimo, HLU / Zack e Lenz ABC controls.
The encoder can be used on DCC analogue miniature networks. The speed can then be programmed independently for each motor. The encoder automatically switches between the various operating modes.
The features of the digital encoder under reference 59212:
- The LokPilot FX encoder has up to 10 reinforced outputs with a current of 250 mA each.
The control engine of the ESU digital device:
The motor control has benefited from a number of improvements, such as a variable PWM frequency setting between 10 kHz and 50 kHz, ensuring very quiet operation. Gone is the hum of the past, gone is silent operation!
.The charge control now has up to 10 HP, which can be adjusted at any time.
The safety aspect of the ESU 59212 encoder:
These digital modules have outputs that are protected in the event of electrical overloads, thus preventing damage to this equipment.
